GENERAL SPECIFICATIONS TABLE
| Item | Specification |
|---|---|
| A/C Compressor Oil | |
| NOTE: Use of any A/C compressor oil other than what is specified for the specific vehicle configuration will damage the A/C compressor and contaminate the refrigerant system. For non-hybrid vehicles with a pulley driven (conventional) A/C compressor, PAG Refrigerant Compressor Oil only must be used. For hybrid vehicles with an electric A/C compressor, Motorcraft® Electric A/C Compressor Oil must be used. | |
| NOTE |
|---|
| Use of any A/C compressor oil other than what is specified for the specific vehicle configuration will damage the A/C compressor and contaminate the refrigerant system. For non-hybrid vehicles with a pulley driven (conventional) A/C compressor, PAG Refrigerant Compressor Oil only must be used. For hybrid vehicles with an electric A/C compressor, Motorcraft® Electric A/C Compressor Oil must be used. |
GENERAL SPECIFICATIONS TABLE
| Item | Specification |
|---|---|
| Magnetic Clutch | |
| Air gap between pulley and clutch disc | 0.3-0.6 mm (0.012-0.024 in) |
GENERAL SPECIFICATIONS TABLE
TORQUE SPECIFICATIONS TABLE
| Description | Nm |
|---|---|
| A/C compressor bolts | 25 |
| A/C compressor bracket bolts | 25 |
| A/C compressor clutch disc and hub bolt | 14 |
| A/C compressor discharge fitting nut (hybrid) | 15 |
| A/C compressor manifold bolt | 15 |
| A/C compressor nut | 25 |
| A/C compressor stud | 9 |
| A/C compressor suction fitting nut (hybrid) | 15 |
| A/C pressure relief valve | 10 |
| Auxiliary coolant flow pump bracket bolts | 25 |
| Compressor manifold and tube suction fitting nut | 15 |
| Condenser fitting nut (inlet and outlet) | 15 |
| Condenser-to-evaporator line fitting nut | 15 |
| Evaporator outlet line fitting nut | 15 |
| Evaporator-to-compressor suction line bracket bolt | 6 |
| Heater core and evaporator core housing nuts | 9 |
| High-pressure Schrader-type valve | 2.5 |
| High-pressure service gauge port valve cap | 0.8 |
| Low-pressure Schrader-type valve | 1.8 |
| Low-pressure service gauge port valve cap | 0.8 |
| Radiator bracket bolts | 10 |
| Thermostatic Expansion Valve (TXV) fitting nut | 15 |
| TXV manifold and tube bracket bolt | 8 |
| Washer reservoir filler neck bolt | 6 |
TORQUE SPECIFICATIONS TABLE
See also:
• JACKING & LIFTING
• REMOVAL