RIDING HEIGHT ADJUSTMENT
Note. Before performing wheel alignment, perform preliminary visual and mechanical inspection of wheels, tires and suspension components. See WHEEL ALIGNMENT THEORY & OPERATION article in GENERAL INFORMATION.
Note. Before performing wheel alignment, check and adjust riding height as necessary. Riding height is adjustable only on models equipped with air suspension.
| CAUTION | On vehicles with air suspension, disconnect electrical power by removing negative battery cable or setting air suspension switch to OFF position. Switch is located in trunk, on left front side of inner panel. |
CASTER ADJUSTMENT
| CAUTION | DO NOT hold tension struts near bend when loosening or tightening lock nuts. |
TOE-IN ADJUSTMENT (FRONT)
Ensure steering wheel is centered. Loosen tie rod end adjusting sleeve clamp bolts or lock nuts. Turn adjusting sleeve or tie rod to adjust toe-in. Tighten tie rod end adjusting sleeve clamp bolt or lock nut.