| CAUTION | At no time, when the timing chain(s) are removed and the cylinder heads are installed, may the crankshaft and/or camshafts be rotated without following established procedures. Failure to follow these directions will result in valve and/or piston damage. Because this is not a free-wheeling engine, if it has "jumped time," there will be damage to the valves and/or pistons and will require the removal of the cylinder heads. |
Note. Required tools; Camshaft Holding Tool (T93P-6256-AH), Camshaft Positioning Tool (T93P-6256-A) and Tensioner Tool (T93P-6256-BH). (Схема №8), (Схема №9) and (Схема №10).