Home ReviewsRefund Car not listed?
Home/Lexus/LX/Lexus LX J200 (2007-2012)/Repair manual/Collision/avoidance/Intuitive Parking Assist System (Dianostic Codes & Circuit …
Contents Wiring diagrams Section: Collision/avoidance All sections

Intuitive Parking Assist System (Dianostic Codes & Circuit Tests): Other Lexus LX J200

Collision/avoidance ~833 words

PROCEDURE

  1. CHECK FOR DTC Clear the DTCs. Refer to DTC CHECK / CLEAR . Check for DTCs. Refer to DTC CHECK / CLEAR . RESULT Result Proceed to DTC C1AE1 is output A No DTC is output B B --> See step 4 A: Go to next step
  2. REPLACE NO. 1 ULTRASONIC SENSOR LH Replace the No. 1 ultrasonic sensor LH with a normally functioning sensor. Refer to REMOVAL . NEXT: Go to next step
  3. CHECK FOR DTC Clear the DTCs. Refer to DTC CHECK / CLEAR . Check for DTCs. Refer to DTC CHECK / CLEAR . RESULT Result Proceed to DTC C1AE1 is output A No DTC is output B B --> END A --> See step 5
  4. USE SIMULATION METHOD TO CHECK. Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE
  5. REPLACE PARKING ASSIST ECU. Refer to REMOVAL
  1. CHECK FOR DTC Clear the DTCs. Refer to DTC CHECK / CLEAR . Check for DTCs. Refer to DTC CHECK / CLEAR . RESULT Result Proceed to DTC C1AE4 is output A No DTC is output B B --> See step 4 A: Go to next step
  2. REPLACE NO. 1 ULTRASONIC SENSOR RH Replace the No. 1 ultrasonic sensor RH with a normally functioning sensor. Refer to REMOVAL . NEXT: Go to next step
  3. CHECK FOR DTC Clear the DTCs. Refer to DTC CHECK / CLEAR . Check for DTCs. Refer to DTC CHECK / CLEAR . RESULT Result Proceed to DTC C1AE4 is output A No DTC is output B B --> END A --> See step 5
  4. USE SIMULATION METHOD TO CHECK. Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE
  5. REPLACE PARKING ASSIST ECU. Refer to REMOVAL
  1. CHECK FOR DTC Clear the DTCs. Refer to DTC CHECK / CLEAR . Check for DTCs. Refer to DTC CHECK / CLEAR . RESULT Result Proceed to DTC C1AE6 is output A No DTC is output B B --> See step 4 A: Go to next step
  2. REPLACE NO. 2 ULTRASONIC SENSOR LH Replace the No. 2 ultrasonic sensor LH with a normally functioning sensor. Refer to REMOVAL . NEXT: Go to next step
  3. CHECK FOR DTC Clear the DTCs. Refer to DTC CHECK / CLEAR . Check for DTCs. Refer to DTC CHECK / CLEAR . RESULT Result Proceed to DTC C1AE6 is output A No DTC is output B B --> END A --> See step 5
  4. USE SIMULATION METHOD TO CHECK. Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE
  5. REPLACE PARKING ASSIST ECU. Refer to REMOVAL
  1. CHECK FOR DTC Clear the DTCs. Refer to DTC CHECK / CLEAR . Check for DTCs. Refer to DTC CHECK / CLEAR . RESULT Result Proceed to DTC C1AE7 is output A No DTC is output B B --> See step 4 A: Go to next step
  2. REPLACE NO. 3 ULTRASONIC SENSOR LH Replace the No. 3 ultrasonic sensor LH with a normally functioning sensor. Refer to REMOVAL . NEXT: Go to next step
  3. CHECK FOR DTC Clear the DTCs. Refer to DTC CHECK / CLEAR . Check for DTCs. Refer to DTC CHECK / CLEAR . RESULT Result Proceed to DTC C1AE7 is output A No DTC is output B B --> END A --> See step 5
  4. USE SIMULATION METHOD TO CHECK. Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE
  5. REPLACE PARKING ASSIST ECU. Refer to REMOVAL
  1. CHECK FOR DTC Clear the DTCs. Refer to DTC CHECK / CLEAR . Check for DTCs. Refer to DTC CHECK / CLEAR . RESULT Result Proceed to DTC C1AE8 is output A No DTC is output B B --> See step 4 A: Go to next step
  2. REPLACE NO. 3 ULTRASONIC SENSOR RH Replace the No. 3 ultrasonic sensor RH with a normally functioning sensor. Refer to REMOVAL . NEXT: Go to next step
  3. CHECK FOR DTC Clear the DTCs. Refer to DTC CHECK / CLEAR . Check for DTCs. Refer to DTC CHECK / CLEAR . RESULT Result Proceed to DTC C1AE8 is output A No DTC is output B B --> END A --> See step 5
  4. USE SIMULATION METHOD TO CHECK. Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE
  5. REPLACE PARKING ASSIST ECU. Refer to REMOVAL
  1. CHECK FOR DTC Clear the DTCs. Refer to DTC CHECK / CLEAR . Check for DTCs. Refer to DTC CHECK / CLEAR . RESULT Result Proceed to DTC C1AE9 is output A No DTC is output B B --> See step 4 A: Go to next step
  2. REPLACE NO. 2 ULTRASONIC SENSOR RH Replace the No. 2 ultrasonic sensor RH with a normally functioning sensor. Refer to REMOVAL . NEXT: Go to next step
  3. CHECK FOR DTC Clear the DTCs. Refer to DTC CHECK / CLEAR . Check for DTCs. Refer to DTC CHECK / CLEAR . RESULT Result Proceed to DTC C1AE9 is output A No DTC is output B B --> END A --> See step 5
  4. USE SIMULATION METHOD TO CHECK. Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE
  5. REPLACE PARKING ASSIST ECU. Refer to REMOVAL

More articles — Intuitive Parking Assist System (Dianostic Codes & Circuit Tests)