Home ReviewsRefund
Home/Lexus/LS/Lexus LS III (2000-2003)/Repair manual/Automatic Trans/Removal & Installation - A/t: Other
Contents Wiring diagrams Section: Automatic Trans All sections

Removal & Installation - A/t: Other Lexus LS III

Automatic Trans

ES300

ApplicationFt. Lbs. (N.m)
Engine Mounting Absorber Bracket Bolt35 (48)
Engine-To-Transaxle Lower Bolt
Bolt At 9 O'clock Position26 (35)
2 Lower Bolts27 (37)
Exhaust Manifold Bracket Bolt15 (20)
Exhaust Manifold Nut46 (62)
Exhaust Pipe Bolt With Springs32 (43)
Flywheel-To-Crankshaft Bolt61 (83)
Flywheel-To-Torque Converter Bolt30 (41)
Front Exhaust Pipe Support Bracket Nut15 (20)
Front Exhaust Pipe Support Stay Bolt25 (34)
Front Frame
14-mm Bolt24 (32)
19-mm Bolt134 (181)
Nut27 (37)
Front Side Engine Mounting Bolt59 (80)
Front Side Transaxle Mount Bolt59 (80)
Hole Cover Bolt15 (20)
Left Side Transaxle Mount Nut59 (80)
Rear Engine Mount Bolt/Nut49 (66)
Stabilizer Bar Bracket Mounting Bolt14 (19)
Starter Bolt29 (39)
Steering Gear Bolt134 (181)
Transaxle-To-Engine Upper Side Mounting Bolt49 (66)
Wheel Lug Nut76 (103)

TORQUE SPECIFICATIONS (ES300)

GS300, GS430, IS300 & LS430

ApplicationFt. Lbs. (N.m)
Access Cover Bolt13 (18)
Catalytic Converter Nut
At Exhaust Pipe32 (43)
At Manifold46 (62)
Drive Shaft Center Support Bearing Bolt27 (37)
Drive Shaft-To-Differential Nut58 (79)
Drive Shaft-To-Transmission Nut58 (79)
Engine Rear Support Mounting Bolt20 (27)
Exhaust Manifold-To-Engine Nut29 (39)
Exhaust Pipe-To-Exhaust Manifold Nut32 (43)
Exhaust Pipe Support Bracket Bolt32 (43)
Flywheel-To-Crankshaft Bolt61 (83)
Flywheel-To-Torque Converter Bolt35 (48)
Oil Cooler Pipe Union Nut32 (44)
Oxygen Sensor32 (44)
Rear Center Floor Crossmember Brace Bolt10 (13)
Shift Control Rod Nut10 (13)
Starter Bolt27 (37)
Tailpipe Nut32 (43)
Transmission-To-Engine Bolt
14-mm Head27 (37)
17-mm Head53 (72)

TORQUE SPECIFICATIONS (GS300, GS430, IS300 & LS430)

LX470

ApplicationFt. Lbs. (N.m)
Access Cover Bolt13 (18)
Crossmember
Bolt37 (50)
Nut55 (74)
Drive Plate Bolt
1st Step36 (49)
2nd StepTighten An Additional 90 Degrees
Drive Shaft Flange Bolt/Nut
Front59 (80)
Rear78 (106)
Exhaust Pipe Flange Nut46 (62)
Oil Cooler Pipe Union Nut51 (69)
Radiator Bolt13 (18)
Torque Converter Bolt35 (48)
Transmission-To-Engine Bolt53 (72)

TORQUE SPECIFICATIONS (LX470)

RX300 WITH U-140E TRANSAXLE

ApplicationFt. Lbs. (N.m)
Engine Mounting Absorber Bracket Bolt35 (48)
Engine-To-Transaxle Lower Bolt (3)
Bolt At 9 O'clock Position26 (35)
2 Lower Bolts27 (37)
Exhaust Manifold Bracket Bolt25 (34)
Front Exhaust Pipe Assembly Bolt41 (56)
Flywheel-To-Crankshaft Bolt61 (83)
Flywheel-To-Torque Converter Bolt30 (41)
Front Exhaust Pipe Support Bracket Bolt15 (20)
Front Frame
12-mm Bolt24 (32)
19-mm Bolt134 (181)
Nut27 (37)
Front Side Engine Mounting Bolt59 (80)
Left Side Transaxle Mount Nut59 (80)
No. 2 Exhaust Pipe At Manifold Bolt41 (56)
Rear Engine Mount Bolt/Nut49 (66)
Starter Bolt29 (39)
Steering Gear Bolt134 (181)
Transaxle-To-Engine Upper Side Mounting Bolt49 (66)
Wheel Lug Nut76 (103)

TORQUE SPECIFICATIONS (RX300 WITH U-140E TRANSAXLE)

RX300 WITH U-140F TRANSAXLE

ApplicationFt. Lbs. (N.m)
Engine-To-Transaxle Lower Bolts (3)
Bolt At 9 O'clock Position48 (35)
2 Lower Bolts27 (37)
Flywheel-To-Crankshaft Bolt61 (83)
Flywheel-To-Torque Converter Bolt30 (41)
Ground Cable Bolt49 (66)
Starter Bolt29 (39)
Transaxle-To-Engine Upper Side Mounting Bolt49 (66)
Wheel Lug Nut76 (103)

TORQUE SPECIFICATIONS (RX300 WITH U-140F TRANSAXLE)

More articles — Removal & Installation - A/t