SYSTEM DESCRIPTION
- LIN COMMUNICATION SYSTEM DESCRIPTION The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication because of an open in the communication lines or other reason, the master control ECU of the relevant system will output a DTC. Refer to «DOOR BUS LINES»(ref-398321-S13494498792011051600000) the table about the communication bus lines and connected components. HINT: Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system. In the following table "o" indicates that the function applies, and "-" indicates that it does not. DOOR BUS LINES Component Master Control LIN Communication DTC Output Function Main Body ECU (Multiplex Network Body ECU) o o Power Window Regulator Motor Assembly (for Driver Side) - - Power Window Regulator Motor Assembly (for Front Passenger Side) - - Power Window Regulator Motor Assembly (for Rear LH Side) - - Power Window Regulator Motor Assembly (for Rear RH Side) - - Multiplex Network Master Switch Assembly - - Sliding Roof ECU (Sliding Roof Drive Gear Sub-assembly) - - CERTIFICATION BUS LINES Component Master Control LIN Communication DTC Output Function Certification ECU (Smart Key ECU Assembly) o o Power Management Control ECU - o Transmission Control ECU Assembly - - ID Code Box (Immobiliser Code ECU) - - AIR CONDITIONING BUS LINES Component Master Control LIN Communication DTC Output Function Air Conditioning Amplifier Assembly o - Integration Control and Panel Assembly - - Multi-display*1 - - *1: w/o Navigation System LIGHTING BUS LINES (W/ AUTOMATIC HIGH BEAM SYSTEM) Component Master Control AFS ECU (Headlight Swivel ECU Assembly) o Inner Rear View Mirror Assembly - Headlight Swivel Motor LH - Headlight Swivel Motor RH - Headlight Leveling Motor LH - Headlight Leveling Motor RH