Home ReviewsRefund
Home/Kia/Rio/Kia Rio III (2011-2015)/Repair manual/Collision/avoidance/Back View Camera System: Overview
Contents Wiring diagrams Section: Collision/avoidance All sections

Back View Camera System: Overview Kia Rio III

Collision/avoidance 3 illustrations

Scheme 11

Scheme 11: Component Location
Scheme 11: Component Location

Scheme 12

Scheme 12: Circuit Diagram
Scheme 12: Circuit Diagram

Description

Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle through the ECM (Reverse Display Room Mirror) mirror or AVN head unit while backing-up.

WARNINGThis system is a supplementary function only. It is the responsibility of the driver or always check the inside/outside rearview mirror and the area behind the vehicle before and while backing up because there is a dead zone that can't see through the camera.

Scheme 13

Scheme 13: Removal
Scheme 13: Removal
  1. Remove the trunk trim in the trunk after removing the screws and clips. (Refer to the «TAIL GATE»(ref-536122-S16185249532013031400000) .
  2. Remove the trunk garnish (A) after disconnecting the connector(B) and removing the nuts.

More articles — Back View Camera System