Hands Free System: Removal & Installation Kia Rio III

Installation

1. Reassemble the hands free switch after connecting the connector.
2. Reassemble the steering wheel.
3. Reassemble the driver airbag module. NOTE: Make sure the audio remote control switch and the airbag module connectors are plugged in properly.

Scheme 9

Scheme 10

1. Disconnect the negative(-) battery terminal.
2. Remove the roof trim. (Refer to the " «ROOF TRIM»(ref-536097-S11146997132013031400000) ")
3. Remove the hands free mic after loosening the connector and screw(3EA) from roof top.
4. Check the continuity of Mic between terminals.