Oil Specification
- The HFC-134a system requires synthetic (POE) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed.
- Compressor (POE) oil varies according to compressor model. Be sure to use oil specified for the model of compressor. Since the electric compressor uses high-voltage, you should use POE oil which have high Volumetric Resistivity. Do not use the same A/C recovery / charging station as conventional belt-driven compressors. WARNING: If the POE oil of the system gets mixed with PAG oil, then dielectric breakdown due to decreased volumetric Resistivity can occur and inoperative A/C compressor may result, A/C compressor may not work. If the POE oil gets mixed with PAG oil, replace the compressor with new one and clean inside the A/C system (condenser, refrigerant line, evaporator and etc.)
Specification
| Model | ESC33i |
|---|---|
| Motor | BLDC Motor |
| Control Type | CAN |
| Compression Type | Scroll |
| Capacity | 33cc/rev |
| Operating Voltage Range | 190~320V |
| Rated Voltage | 288V |
| Mount Type | Engine Mounting, 6 Point Mounting |