GENERATOR SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Generator Model | A3TG0391, MITSUBISHI | |
| Nominal Rating | 12 Volts, 110 Amps | |
| Minimum RPM Under No Load (With 13.5 Volts Applied) | 1000 RPM | |
| Hot Output Current (With 13.5 Volts Applied) | ||
| At 1300 RPM | 31 Amps | |
| At 2500 RPM | 90 Amps | |
| At 5000 RPM | 102 Amps | |
| Regulated Output Voltage | 14.1-14.7 Volts | |
| Minimum Brush Length | .197 in. (5.00 mm) | |
| Brush Spring Pressure | 17.28-21.51 ozs. (4.8-6.1 N) | |
| Slip Ring Minimum Outer Diameter | .870 in. (22.1 mm) | |
| Rotor (Field Coil) Resistance | 1.7-2.1 Ohms | |
GENERATOR SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Alternator Bracket Mounting Bolt | 42-48 (57-65) | |
| Alternator Mounting Bolt | ||
| Lower | 15-19 (21-26) | |
| Upper | 44-51 (60-69) | |
| Alternator Stay Mounting Bolts | 15-19 (21-26) | |
| Pulley Nut | 73-101 (99-137) | |
| INCH Lbs. (N.m) | ||
| Battery Ground Cable Bolt | 89-97 (10-11) | |
| "B" Terminal Nut | 80-97 (9-11) | |
| Ground Bolt | 18-27 (2-3) | |
| Through Bolt & Nut | 35-44 (4-5) | |
TORQUE SPECIFICATIONS