Home ReviewsRefund
Home/Hyundai/Veloster/Hyundai Veloster I (2011-2015)/Repair manual/Testing & Diagnostics/General Information - Emission Control System - Non-Turbo: …
Contents Wiring diagrams Section: Testing & Diagnostics All sections

General Information - Emission Control System - Non-Turbo: Specifications Hyundai Veloster I

Testing & Diagnostics ~131 words

Specification

Purge Control Solenoid Valve (PCSV)

  1. Specification Item Specification Coil Resistance (ohms) 22.0 ~ 26.0 [20°C (68°F)]

Fuel Tank Pressure Sensor (FTPS)

  1. Type: Piezo-Resistive Pressure Sensor
  2. Specification Pressure [kPa (kgf/cm 2 , in H2O)] Output Voltage (V) -6.67 (-0.068, -26.8) 0.5 0 2.5 +6.67 (0.068, 26.8) 4.5

Canister Close Valve (CCV)

  1. Specifications Item Specification Coil Resistance (ohms) 19.5 ~ 22.5 [20°C (68°F)] TIGHTENING TORQUES Item kgf.m N.m lb-ft Positive crankcase ventilation valve installation 0.8 ~ 1.2 7.8 ~ 11.8 5.8 ~ 8.7 Canister bracket installation bolt 2.0 ~ 3.0 19.6 ~ 29.4 14.5 ~ 21.7 Canister installation bolt 0.4 ~ 0.6 3.9 ~ 5.9 2.9 ~ 4.3 Fuel tank air filter installation bolt 0.4 ~ 0.6 3.9 ~ 5.9 2.9 ~ 4.3

More articles — General Information - Emission Control System - Non-Turbo