SPECIFICATION
| Item | F4A42 | ||
|---|---|---|---|
| Torque converter type | 3-element, 1-stage, 2-phase type | ||
| Transaxle type | 4-speed forward, 1-speed reverse | ||
| Engine displacement | 2.0LGSL | 2.7 GSL | |
| Gear ratio | 1st | 2.842 | 2.842 |
| 2nd | 1.592 | 1.592 | |
| 3rd | 1.000 | 1.000 | |
| 4th | 0.712 | 0.712 | |
| Reverse | 2.480 | 2.480 | |
| Final gear ratio | 2WD | 4.626 | 4.042 |
| 4WD | 4.626 | 4.407 | |
| Shift pattern | Variable | ||
| Shift range | 4range (P-R-N-D) + Sports mode | ||
| Shift range valve | PWM; 5EA(Duty control) | ||
| Planetary gear | 2EA(Output planetary/Overdrive planetary) | ||
| Clutch | 3EA | ||
| Brake | 2EA | ||
| OWC | 1EA | ||
GENERAL SPECIFICATION (A/T)
SERVICE SPECIFICATIONS
| Items | Standard value |
|---|---|
| Output shaft preload | 0.01-0.09 mm (0.0004-0.0035 in) |
| Brake reaction plate end play | 0-0.16 mm (0-0.0063 in) |
| Low and reverse brake end play | 1.65-2.11 mm (0.065-0.083 in) |
| Second brake end play | 0.79-1.25 mm (0.0311-0.0492 in) |
| Underdrive sun gear end play | 0.25-0.45 mm (0.0098-0.0177 in) |
| Input shaft end play | 0.70-1.20 mm (0.0276-0.0472 in) |
| Differential case preload | 0.045-0.105 mm (0.0018-0.0041 in) |
| Underdrive clutch end play (wave disk) | 1.25-1.45 mm (0.0492-0.057 in) |
| Overdrive clutch return spring retainer end play | 0-0.09 mm (0-0.0035 in) |
| Overdrive clutch end play (wave disk) | 1.6-1.8 mm (0.0630-0.0709 in) |
| Reverse clutch end play | 1.5-1.7 mm (0.0590-0.0609 in) |
| Backlash between differential side gear and pinion | 0.025-0.150 mm (0.001-0.006 in) |
SERVICE SPECIFICATIONS (A/T)
TIGHTENING TORQUE
| ITEM | N.m | Kgf-cm | Lbf.ft |
|---|---|---|---|
| Wiring harness bracket | 20~26 | 200 ~ 260 | 14.8~19.1 |
| Control cable bracket bolt | 20~26 | 200 ~ 260 | 14.8~19.2 |
| Eye bolt | 27~33 | 270 ~ 330 | 19.9~24.3 |
| Oil cooler feed tube | 10~12 | 100~120 | 7.4~8.9 |
| Oil filter | 11 ~13 | 110~130 | 8.1 ~9.6 |
| Input shaft speed sensor | 10~12 | 100~120 | 7.4 ~ 8.9 |
| Output shaft speed sensor | 10~12 | 100~120 | 7.4~8.9 |
| Manual control lever | 18~25 | 180~250 | 13.3~18.4 |
| Transaxle range switch | 10~12 | 100~120 | 7.4~8.9 |
| Speedometer gear | 4~6 | 40~60 | 3.0~4.4 |
| Valve body cover | 8~10 | 80~100 | 5.9~7.4 |
| Valve body mounting bolt | 10~12 | 100~120 | 7.4~8.9 |
| Oil temperature sensor | 10~12 | 100~120 | 7.4~8.9 |
| Manual control shaft detent | 5~7 | 50~70 | 3.7~5.2 |
| Rear cover | 20~26 | 200 ~ 260 | 14.8~19.2 |
| Torque converter housing | 42~54 | 420 ~ 540 | 31.0~39.8 |
| Oil pump | 20~26 | 200 ~ 260 | 14.8~19.2 |
| Transfer drive gear | 16~22 | 160~220 | 11.8~16.2 |
| Output shaft lock nut | 16~18 | 160~180 | 11.8~13.3 |
| Output shaft bearing retainer | 20~26 | 200 ~ 260 | 14.8~19.2 |
| Oil filler plug | 29~34 | 290 ~ 340 | 21.4~25.1 |
| Oil drain plug | 29~34 | 290 ~ 340 | 21.4~25.1 |
| Transfer drive gear lock nut | 180~210 | 1800~2100 | 132.8~154.9 |
| Differential drive gear to subframe bolts | 130~140 | 1300~1400 | 95.9~103.3 |
| Valve body | 10~12 | 100~120 | 7.4~8.9 |
| Solenoid valve support | 5~7 | 50~70 | 3.7~5.2 |
| Plate | 5~7 | 50~70 | 3.7~5.2 |
| Pressure check plug | 8~10 | 80~100 | 5.9~7.4 |
| Front roll stopper bracket to subframe bolts | 40~55 | 400 ~ 550 | 29.5~40.6 |
| Front roll stopper insulator bolt and nut | 50~65 | 500 ~ 650 | 36.9~47.9 |
| Front roll stopper bracket to transaxle bolts | 60~80 | 600 ~ 800 | 44.3~59.0 |
| Rear roll stopper bracket | 40~55 | 400 ~ 550 | 29.5~40.6 |
| Rear roll stopper insulator bolt and nut | 50~65 | 500 ~ 650 | 36.9~47.9 |
| Rear roll stopper bracket to transaxle bolts | 60~80 | 600 ~ 800 | 44.3~59.0 |
| Transaxle mounting sub bracket nut | 60~80 | 600 ~ 800 | 44.3~59.0 |
| Transaxle mounting bracket bolts | 40~55 | 400 ~ 550 | 29.5~40.6 |
| Transaxle mounting insulator bolt | 90~110 | 900~1100 | 66.4~81.1 |
TIGHTENING TORQUE SPECIFICATION (A/T)