STARTER SPECIFICATIONS
| Application | Specification | ||
|---|---|---|---|
| Armature Maximum Runout | |||
| New | 0.001" (0.02 mm) | ||
| In Service | 0.002" (0.05 mm) | ||
| Brush Length | (1) | ||
| Brush Spring Tension | |||
| Automatic Transaxle | 3.53-3.97 Lbs. (15.7-17.7 N.) | ||
| Manual Transaxle | 3.07-4.41 Lbs. (13.7-19.6 N.) | ||
| Commutator Outside Diameter | |||
| Automatic Transaxle | |||
| New | 1.102-1.106" (28.0-28.1 mm) | ||
| In Service | 1.083" (27.5 mm) | ||
| Manual Transaxle | |||
| New | 1.177-1.181" (29.9-30.0 mm) | ||
| In Service | 1.142"(29.0 mm) | ||
| Insulator (Mica) Depth | |||
| Automatic Transaxle | |||
| New | 0.016-0.020" (0.4-0.5 mm) | ||
| In Service | 0.020-0.031" (0.5-0.8 mm) | ||
| Manual Transaxle | |||
| New | 0.006" (0.15 mm) | ||
| In Service | 0.008" (0.2 mm) | ||
| No-Load Ratings | |||
| Maximum Draw | 60 Amps | ||
| Minimum RPM | 5500 | ||
| Voltage | 11.5 Volts | ||
| Number Of Pinion Teeth | 8 | ||
| Pinion Gap | 0.197-0.079" (0.5-2.0 mm) | ||
| Rated Voltage | 12.0 Volts (0.9 kW) | ||
| Type | Direct Drive | ||
| (1) Bottom of limit line that is stamped into brush. (Scheme 1) | |||
| (1) | Bottom of limit line that is stamped into brush. (Scheme 1) |
STARTER SPECIFICATIONS
Scheme 1
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Starter Mounting Bolts | (1) |
| INCH Lbs. (N.m) | |
| Solenoid Battery Cable Terminal Nut | 88-106 (10-12) |
| Transaxle Range Switch | 88-106 (10-12) |
| (1) Information not available from manufacturer. | |
| (1) | Information not available from manufacturer. |
TORQUE SPECIFICATIONS