Home ReviewsRefund Car not listed?
Home/Honda/Fit/Honda Fit GE (2007-2014)/Repair manual/Testing & Diagnostics/DTC P2610: ECM/PCM Ignition Off Internal Timer Malfunction
Contents Wiring diagrams Section: Testing & Diagnostics All sections

DTC P2610: ECM/PCM Ignition Off Internal Timer Malfunction Honda Fit GE

Testing & Diagnostics ~170 words

Note. Before you troubleshoot, record all freeze data and any on-board snapshot, and review GENERAL TROUBLESHOOTING INFORMATION .

  1. Turn the ignition switch to ON (II).
  2. Clear the DTC with the HDS.
  3. Check for Pending or Confirmed DTCs with the HDS. Is DTC P2610 indicated? YES: Go to step 4 . NO: Intermittent failure, the system is OK at this time.
  4. Update the ECM/PCM if it does not have the latest software (see «ECM/PCM UPDATE»(ref-320426-S22945234462009071400000) ), or substitute a known-good ECM/PCM (see «SUBSTITUTING THE ECM/PCM»(ref-320425-S18610926012009071400000) ).
  5. Check for Pending or Confirmed DTCs with the HDS. Is DTC P2610 indicated? YES: If the ECM/PCM was updated, substitute a known-good ECM/PCM (see «SUBSTITUTING THE ECM/PCM»(ref-320425-S18610926012009071400000) ), then recheck. If the ECM/PCM was substituted, go to step 1 . NO: If the ECM/PCM was updated, troubleshooting is complete. If the ECM/PCM was substituted, replace the original ECM/PCM (see «ECM/PCM REPLACEMENT»(ref-320426-S21651098282009071400000) ). If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.

More articles — Pgm-Fi System