Home ReviewsRefund
Home/Honda/Accord/Honda Accord VI (1997-2002)/Repair manual/Testing & Diagnostics/Pgm-Fi System (V6) (Supplemental): Removal & Installation
Contents Wiring diagrams Section: Testing & Diagnostics All sections

Pgm-Fi System (V6) (Supplemental): Removal & Installation Honda Accord VI

Testing & Diagnostics 2 illustrations

Primary HO2S Replacement

Special Tools Required

  1. Commercially available O2 sensor wrench: Snap-on YA8875, SP Tools 93750, or equivalent

Scheme 246

Scheme 246
Scheme 246
  1. Disconnect the primary HO2S 4P connector (A), then remove the primary HO2S (B).
  2. Install the primary HO2S in the reverse order of removal.

Secondary HO2S Replacement

Special Tools Required

Commercially available O2 sensor wrench: Snap-on YA8875, SP Tools 93750, or equivalent

Scheme 247

Scheme 247: Secondary HO2S Replacement
Scheme 247: Secondary HO2S Replacement
  1. Disconnect the secondary HO2S 4P connector (A), then remove the secondary HO2S (B).
  2. Install the secondary HO2S in the reverse order of removal.

More articles — Pgm-Fi System (V6) (Supplemental)