Normal Operation
The power seat switch is powered by battery voltage to driver seat control switch circuit 30-AH6 (RD/YE) and is supplied ground on driver circuit 31-AH6 (BK/YE).
The power seat should move quietly during operation. Some noise is acceptable.
The power seat movement should be smooth and the seat cushion should not rock during or after operation.
The driver and passenger power seats should travel fully horizontal (forward/rearward) and the driver power seat should travel fully vertical (front up/down and rear up/down).
The power seat switch is powered by battery voltage to passenger seat control switch circuit 30-AH14 (RD/YE) and is supplied ground on passenger circuits 31-AH6 (BK/YE) and 31-AH1 (BK/YE).
The power seat switch is powered by battery voltage on driver circuit 30-AH6 (RD/YE) and is supplied ground on circuit 31-AH6 (BK/YE). When pressed, the power seat switch supplies that voltage and ground to a power seat track motor to move the seat. When pressed in the opposite direction, the power seat switch reverses the polarity to that same power seat track motor, which moves the seat in the opposite direction. There are three power seat track motors that combine to move the seat horizontally (forward/reverse) and vertically (front up/down and rear up/down).
The power seat switch is powered by battery voltage on passenger circuit 30-AH14 (RD/YE) and is supplied grounds on circuit 31-AH6 (BK/YE) and circuit 31-AH1 (BK/YE). When pressed, the power seat switch supplies that voltage and ground to a power seat track motor to move the seat. When pressed in the opposite direction, the power seat switch reverses the polarity to that same power seat track motor, which moves the seat in the opposite direction. There is one power seat track motor that moves the seat horizontally (forward/reverse).
The driver heated seat module is powered by battery voltage on circuit 30-HC21 (RD) and by ignition voltage circuit 20-HC21 (PK/BK), and is supplied ground on circuit 31-HC21 (BK). The heated seat switch has a high and low setting depending on selection. The heated seat switch uses the ground on circuit 31-HC6 (BK) to provide a ground input to the heated seat module on circuit 8-HC15 (WH) (high setting) or 10-HC15 (GY) (low setting). The heated seat module supplies voltage to the heated seat elements in the seat cushion and the seat back.
The passenger heated seat module is powered by battery voltage on circuit 30-HC22 (RD) and by ignition voltage circuit 20-HC22 (PK/YE), and is supplied ground on circuit 31-HC22 (BK). The heated seat switch has a high and low setting depending on selection. The heated seat switch uses the ground on circuit 31-HC9 (BK) to provide a ground input to the heated seat module on circuit 8-HC18 (WH/GN) (high setting) or 10-HC18 (GY/OG) (low setting). The heated seat module supplies voltage to the heated seat elements in the seat cushion and the seat back.
The heated seat switch uses circuit 8-HC15 (WH) for the high setting input to the heated seat module.
The heated seat switch uses circuit 10-HC15 (GY) for the low setting input to the heated seat module.
The heated seat switch uses circuit 8-HC18 (WH/GN) for the high setting input to the heated seat module.
The heated seat switch uses circuit 10-HC18 (GY/OG) for the low setting input to the heated seat module.