TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Ignition switch screws | 7 |
| Ignition switch electrical connector bolt | 1 |
| Instrument panel steering column opening cover reinforcement bolts | 15 |
| Lower instrument panel steering column cover screws | 9 |
| Multifunction switch screws | 3 |
TORQUE SPECIFICATIONS
The steering column switches consist of the following components
- multifunction switch
- ignition switch
The integrated multifunction switch is mounted to the LH side of the steering column and controls the turn signals, hazard flasher, windshield wiper/washer control, and headlamp dimmer/flash-to-pass.
For information on the turn signals, refer to EXTERIOR LIGHTING .
For information on the hazard flasher, refer to EXTERIOR LIGHTING .
For information on the windshield wiper/washer control, refer to WIPERS AND WASHERS .
For information on the headlamp dimmer/flash-to-pass, refer to EXTERIOR LIGHTING .
The ignition switch is mounted below the steering column and is activated by rotating the key lock cylinder on the steering column.
For information on the key release interlock actuator, refer to STEERING COLUMN .
Refer to WIPER/WASHER (Taurus) or WIPER/WASHER (Sable) for schematic and connector information.
Refer to EXTERIOR LIGHTS (Taurus) or EXTERIOR LIGHTS (Sable) for schematic and connector information.
Refer to POWER DISTRIBUTION (Taurus) or POWER DISTRIBUTION (Sable) for schematic and connector information.
See also:
• COMPONENT TESTING