Home ReviewsRefund
Home/Ford/Focus/Ford Focus III (2011-2015)/Repair manual/Removal & Installation/Engine Emission Control - 2.0L Ecoboost: Overview
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Emission Control - 2.0L Ecoboost: Overview Ford Focus III

Removal & Installation 1 illustration ~175 words

Scheme 151

Scheme 151: 2.0L Gasoline Turbocharged Direct Injection (GTDI)
Scheme 151: 2.0L Gasoline Turbocharged Direct Injection (GTDI)
ItemDescription
1Crankcase vent oil separator

Overview

Note. Do not permanently remove or render inoperative any part of the vehicle emission control system including related hardware. Failure to comply may violate applicable state and federal laws.

Note. The vehicle emission routing diagrams are contained in the Description and Operation .

Refer to: Engine Emission Control - System Operation and Component Description .

The PCV system uses intake manifold vacuum to ventilate blow-by vapors and evaporated oil from the crankcase and returns them to the intake manifold for combustion. The PCV valve varies the amount of blow-by vapors and evaporated oil returned to the intake manifold.

System Operation

ENGINE CONTROLS - DESCRIPTION & OPERATION (EXCEPT DIESEL & HYBRID) .

Component Description

ENGINE CONTROLS - DESCRIPTION & OPERATION (EXCEPT DIESEL & HYBRID) .

Ford diagnostic equipment

GENERAL EQUIPMENT

  1. For PCM Diagnostic Trouble Codes (DTCs) REFER to: «ELECTRONIC ENGINE CONTROLS - SYSTEM OPERATION AND COMPONENT DESCRIPTION»(ref-515939-S42809577052012120400000) . MIL Code List. For driveability symptoms without Diagnostic Trouble Codes (DTCs), ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID) .

More articles — Engine Emission Control - 2.0L Ecoboost