Home ReviewsRefund Car not listed?
Home/Ford/Focus/Ford Focus I facelift (2001-2007)/Repair manual/Automatic Trans/Automatic Transmission External Controls System: Overhaul
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission External Controls System: Overhaul Ford Focus I facelift

Automatic Trans

DISASSEMBLY

  1. Disconnect the overdrive (O/D) switch electrical connector.
  2. Remove the selector lever knob. Remove and discard the screw.
  3. Disassemble the selector lever. Pull off the tappet. Unclip the bezel.

ASSEMBLY

CAUTIONWhen installing the selector lever knob, make sure the wiring harness is positioned forward and is centered on the shift lever shaft, or damage to the shift lever or wiring harness will occur.
  1. To assemble, reverse the disassembly procedure. Coat all sliding and turning parts with grease. Install a new selector lever knob screw.

More articles — Automatic Transmission External Controls System