Home ReviewsRefund
Home/Ford/Focus/Ford Focus I facelift (2001-2007)/Repair manual/Automatic Trans/Automatic Transmission External Controls System: Adjustments
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission External Controls System: Adjustments Ford Focus I facelift

Automatic Trans ~108 words

Adjustment

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to «JACKING AND LIFTING»(ref-278237) article.
  2. Shift selector lever in DRIVE position.
  3. Disconnect the shift cable end from the manual control lever.
  4. Unlock the shift cable end. Make sure that the cable end moves freely.
  5. Move the transaxle selector lever to DRIVE position (TR sensor removed shown).
  6. Connect the shift cable end of the manual control lever.
  7. Press the lock tab down to secure the cable end from moving.
  8. Check to make sure that the vehicle starts in PARK and NEUTRAL and the reverse lamps illuminate in REVERSE.

More articles — Automatic Transmission External Controls System