Home ReviewsRefund
Home/Ford/Focus/Ford Focus I рестайлинг (2001-2007)/Repair manual/Ignition System/Engine Ignition - 2.0L Zetec: Removal & Installation
Contents Section: Ignition System All sections

Engine Ignition - 2.0L Zetec: Removal & Installation Ford Focus I рестайлинг

Ignition System 5 illustrations

Installation

  1. To install, reverse the removal procedure.

Scheme 6

Scheme 6: Removal
Scheme 6: Removal

Scheme 7

Scheme 7
Scheme 7

Scheme 8

Scheme 8
Scheme 8
  1. Remove the ignition coil. For additional information, refer to «IGNITION COIL PACK»(ref-207753-S32351226832005120100000) .
  2. Remove the audio unit suppressor. Disconnect the electrical connector. Remove the audio unit suppressor.
  3. Detach the exhaust gas recirculation (EGR) tube from the ignition coil bracket.
  4. Remove the ignition coil bracket.

Scheme 9

Scheme 9: Installation
Scheme 9: Installation

Scheme 10

Scheme 10
Scheme 10
  1. To install, reverse the removal procedure.

More articles — Engine Ignition - 2.0L Zetec