HVAC System - Compressor Servicing: Other Ford Explorer II

Ford Motor Co. (Taurus 3.4L SHO)

1. Discharge A/C system, using approved refrigerant recovery/recycling equipment. Remove A/C compressor. Drain and measure oil from compressor.
2. Remove pulley assembly. Using Spanner Wrench (T81P-19623-MH), remove shaft nut and lock washer. Using a steering wheel puller, remove clutch plate, shaft key and shim. Remove snap ring and pulley assembly, by hand. If necessary, use a 3-jaw puller to remove pulley assembly. Remove clutch coil wire from retaining brace on compressor. Remove snap ring and clutch coil. (Схема №1)