Home/Ford/Explorer/Ford Explorer II (1994-2003)/Repair manual/General Servicing - All Makes/HVAC System - Compressor Refrigerant Oil Checking: Specific…
Contents Wiring diagrams Section: General Servicing - All Makes All sections

HVAC System - Compressor Refrigerant Oil Checking: Specifications Ford Explorer II

REFRIGERANT OIL & REFRIGERANT CAPACITY SPECIFICATIONS

Note. Always refer to underhood A/C specification label in engine compartment or A/C compressor label while servicing A/C system. If engine compartment/compressor label specifications differ from specifications in this article, use underhood/compressor label specifications.

Note. DO NOT exceed A/C system refrigerant oil capacity when servicing system.

Application(1) Oil/OuncesRefrigerant/Ounces
"E" Van Series
With Rear Unit13.064.0
Without Rear Unit9.044.0
Expedition & Navigator(2)(2)
Explorer & Mountaineer7.030.0
F150/F250 Pickup Series9.032.0
F250HD/F350 Pickup Series
Ford FS-10 Compressor
With Rear Unit10.0(3)
Without Rear Unit7.0(3)
Sanden SD-7H15 Compressor10.0(3)
Ranger7.030.0
Villager
With Rear Unit10.053.0
Without Rear Unit7.032.0
Windstar
With Rear Unit13.056.0
Without Rear Unit9.044.0
(1) Total system capacity, unless otherwise noted. (2) Refrigerant oil and refrigerant capacity not available at time of publication. Refer to underhood A/C specification label in engine compartment. (3) Manufacturer specifies maximum refrigerant capacity as 38.0 ounces. Refer to underhood A/C specification label in engine compartment for specific application.
(1)Total system capacity, unless otherwise noted.
(2)Refrigerant oil and refrigerant capacity not available at time of publication. Refer to underhood A/C specification label in engine compartment.
(3)Manufacturer specifies maximum refrigerant capacity as 38.0 ounces. Refer to underhood A/C specification label in engine compartment for specific application.

REFRIGERANT OIL & R-134a REFRIGERANT CAPACITY