DTC P061A: INTERNAL CONTROL MODULE TORQUE PERFORMANCE
| Description | Indicates a torque calculation error occurred in the powertrain control module (PCM). | ||
|---|---|---|---|
| Possible Causes | |||
| Diagnostic Aids | Check for sensor and circuit related DTCs. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST QF . | ||
P061A - INTERNAL CONTROL MODULE TORQUE PERFORMANCE
DTC P0A18: MOTOR TORQUE SENSOR CIRCUIT RANGE/PERFORMANCE
| Description | The powertrain control module (PCM) checks the amount of the traction motor torque delivered, by monitoring the frequency of the torque of motor AC (TMAC) signal. This DTC indicates the TMAC signal is out of expected range. | ||
|---|---|---|---|
| Possible Causes | TMAC circuit open TMAC circuit shorted to PWR or GND | ||
| Diagnostic Aids | Monitor the PCM MTQ_OUT PID. The PID value should be 0 Nm (0 lb ft) in PARK or NEUTRAL if the brake pedal is not applied. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST TD . | ||
P0A18 - MOTOR TORQUE SENSOR CIRCUIT RANGE/PERFORMANCE
DTC P0A23: GENERATOR TORQUE SENSOR CIRCUIT RANGE/PERFORMANCE
| Description | The powertrain control module (PCM) checks the amount of the generator motor torque delivered, by monitoring the frequency of the torque of generator AC (TGAC) signal. This DTC indicates the TGAC signal is out of expected range. | ||
|---|---|---|---|
| Possible Causes | TGAC circuit open TGAC circuit shorted to PWR or GND Damaged transaxle Damaged PCM Damaged TCM | ||
| Diagnostic Aids | Monitor the PCM GTQ_CMD PID. The PID value should be 0 Nm (0 lb ft) in PARK or NEUTRAL if the brake pedal is not applied. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST TC . | ||
P0A23 - GENERATOR TORQUE SENSOR CIRCUIT RANGE/PERFORMANCE
See also:
• PINPOINT TEST HK