| Description | The powertrain control module (PCM) ROM has been corrupted. | ||
|---|---|---|---|
| Possible Causes | An attempt was made to change the calibration Module programming error Damaged PCM | ||
| Diagnostic Aids | Reprogram or update the calibration. Reprogram the VID block (use as built data). Check for other DTCs or drive symptoms for additional information. Be sure to check for aftermarket performance products before replacing the PCM. If replacement is necessary, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||
P0605 - INTERNAL CONTROL MODULE READ ONLY MEMORY (ROM) ERROR