Electronic Engine Control System - 2.3L - (Except Hybrid): Component Locations Ford Escape I рестайлинг

Special Tool(s)

CRANKSHAFT POSITION SENSOR SPECIAL TOOL Timing Peg, Crankshaft 303-507

Scheme 16

Scheme 17

Scheme 18

Scheme 19

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to «JACKING AND LIFTING»(ref-232183) .
2. Disconnect the battery ground cable. For additional information, refer to «BATTERY, MOUNTING AND CABLES»(ref-232248) .
3. Remove the 5 bolts and the RH splash shield.
4. Remove the plug.
5. Turn the crankshaft pulley bolt to position the number one cylinder at top dead center and install the special tool.
6. Disconnect the crankshaft position (CKP) sensor electrical connector.
7. Remove the bolts and the CKP sensor.

HEATED OXYGEN SENSOR SPECIAL TOOL Socket, Exhaust Gas Oxygen Sensor 303-476 (T94P-9472-A)

Scheme 20

CATALYST MONITOR SENSOR SPECIAL TOOL Socket, Exhaust Gas Oxygen Sensor 303-476 (T94P-9472-A)