Electronic Engine Control System - (Hybrid): Component Locations Ford Escape I рестайлинг

Special Tool(s)

SPECIAL TOOL(S) Timing Peg, Crankshaft 303-507

Scheme 30

Scheme 31

Scheme 32

Scheme 33

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to «JACKING AND LIFTING»(ref-232183) .
2. Disconnect the battery ground cable. For additional information, refer to «BATTERY, MOUNTING AND CABLES»(ref-232248) .
3. Remove the plug.
4. Turn the crankshaft pulley bolt to position the number one cylinder at top dead center and install the special tool.
5. Disconnect the crankshaft position (CKP) sensor electrical connector.
6. Remove the 2 bolts and the CKP sensor.

SPECIAL TOOL(S) Socket, Exhaust Gas Oxygen Sensor 303-476 (T94P-9472-A)

Scheme 34

SPECIAL TOOL(S) Socket, Exhaust Gas Oxygen Sensor 303-476 (T94P-9472-A)