Home ReviewsRefund
Home/Ford/Escape/Ford Escape I рестайлинг (2004-2007)/Repair manual/Mechanical/Engine - 2.3L - (Except Hybrid): Overhaul
Contents Section: Mechanical All sections

Engine - 2.3L - (Except Hybrid): Overhaul Ford Escape I рестайлинг

Mechanical ~213 words

Disassembly

CAUTIONIf the components are to be reinstalled, they must be installed in the same positions. Mark the components removed for locations.
  1. Remove the 4 bolts and the coolant outlet. Discard the gasket.
  2. Remove the 2 bolts and the exhaust gas recirculation (EGR) valve. Discard the gasket.
  3. Remove and discard the cylinder head temperature (CHT) sensor.
  4. Remove the spark plugs.
  5. Remove the valve tappets.
  6. Using the special tools, compress the valve springs and remove the valve collets, valve spring retainers and the valve springs.
  7. Inspect the components, if necessary. For additional information, refer to «ENGINE SYSTEM-GENERAL INFORMATION»(ref-232214) .
  8. Remove the valves.
  9. Using the special tools, remove and discard the valve seals.
  10. Inspect the valves. For additional information, refer to «ENGINE SYSTEM-GENERAL INFORMATION»(ref-232214) . Install new parts, as necessary.

Assembly

  1. Install the valves.
  2. Using the special tool, install the valve seals.
  3. Using the special tools, install the valve springs. Insert the valve springs and the valve spring retainers. Compress the valve springs and install the valve collets, using grease and a small screwdriver.
  4. Install the valve tappets.
  5. Install the spark plugs. Tighten to 15 Nm (11 lb-ft).
  6. Install a new CHT sensor. Tighten to 12 Nm (9 lb-ft).
  7. Install the EGR valve, using a new gasket. Tighten to 25 Nm (18 lb-ft).
  8. Using a new gasket, install the coolant outlet and bolts. Tighten to 25 Nm (18 lb-ft).

More articles — Engine - 2.3L - (Except Hybrid)