Engine Ignition System - 2.0L Gtdi: Removal & Installation Ford Edge I рестайлинг

Removal and Installation

1. Remove the ignition coil. For additional information, refer to «IGNITION COIL-ON-PLUG»(ref-494612-S29220305462012081400000) in this service information.
2. Remove the 4 spark plugs. To install, tighten to 12 Nm (106 lb-in).
3. Inspect the 4 spark plugs. For additional information, refer to «ENGINE SYSTEM - GENERAL INFORMATION»(ref-494566) .
4. To install, reverse the removal procedure. Check and adjust the spark plug gap as necessary.