Home ReviewsRefund
Home/Dodge/Nitro/Dodge Nitro I (2006-2011)/Repair manual/Mechanical/4.0L Engine - Service Information: Overhaul
Contents Wiring diagrams Section: Mechanical All sections

4.0L Engine - Service Information: Overhaul Dodge Nitro I

Mechanical

TIMING BELT TENSIONER PULLEY ASSEMBLY

1 - TENSIONER PULLEY
2 - PIVOT BOLT
3 - TENSIONER BRACKET

Note. The tensioner pulley (1), bracket (3), and pivot bolt (2) is serviced as an assembly.

  1. Inspect pulley (1) for free movement. Replace if pulley is loose, seized, or rough turning. (Схема №433)
  2. Inspect pulley bearing and seal. Replace if damaged.
  3. Inspect pivot bolt (2) for free movement in assembly housing. Replace assembly if seized or excessive looseness.
1 - TENSIONER PULLEY
2 - PIVOT BOLT
3 - TENSIONER BRACKET
  1. Install the timing belt tensioner pulley (1) assembly. Tighten the pivot bolt (2) to 61 N.m (45 ft. lbs.). (Схема №434)
  2. Install the timing belt. See «INSTALLATION»(ref-306143-S40647239562008120900000).

More articles — 4.0L Engine - Service Information