Front Axle: Maintenance Dodge Charger VI

STANDARD PROCEDURE - FLUID FILL

Note. The 175MM FIA Front Axle assembly is designed for 'fill for life' and is not manufactured with a fluid drain plug.

1. Raise and support vehicle. Refer to «HOISTING, STANDARD PROCEDURE»(ref-481392-S03705606742012062200000).
2. Remove axle fill plug (1). see scheme 130
3. Fill axle with 600ml (0.64 qts.) of Mopar® 75W-90 Synthetic Gear Lubricant. Fluid should be within 3/16" of bottom of fill hole.

Scheme 32

1. Remove right halfshaft assembly. Refer to «REMOVAL»(ref-481402-S26056269572012062200000).
2. Using suitable screwdriver, remove axle seal (1). see scheme 131