Home ReviewsRefund
Home/Dodge/Challenger/Dodge Challenger III рестайлинг (2010-2014)/Repair manual/Mechanical/3.6L Engine - Service Information: Component Locations
Contents Section: Mechanical All sections

3.6L Engine - Service Information: Component Locations Dodge Challenger III рестайлинг

Mechanical 26 illustrations ~366 words

SPECIAL TOOLS

10198 - Holder, Vibration Damper (Originally Shipped In Kit Number(s) 10223.) 10199 - Installer, Crankshaft Front Oil Seal (Originally Shipped In Kit Number(s) 10223.) 10200-1 - Holder, Timing Chain, Left Side 10200-3 - Pin 10202 - Locks, Camshaft/Phaser 10202-1 - Lock, Camshaft/Phaser, Right Side 10202-2 - Lock, Camshaft/Phaser, Left Side 10224 - Adapter, Valve Spring (Originally Shipped In Kit Number(s) 10223.) 10242-1 - Brackets, Engine Lifting, Left Side (Originally Shipped In Kit Number(s) 10223.) 10242-2 - Brackets, Engine Lifting, Right Side (Originally Shipped In Kit Number(s) 10223.) 10255 - Installer, Spark Plug Tube 10256 - Installer, Cam Installer, Cam Sensor / Spark Plug Tube Seal (Originally Shipped In Kit Number(s) 10256.) 10368 - Set, Universal Protective Cap 10369 - Holder, Timing Chain 7700-A - Tester, Cooling System 8189 - Guide Pins (Originally Shipped In Kit Number(s) 8180, 8180CC, 8263, 8263CC.) 8511 - Remover, Seal (Originally Shipped In Kit Number(s) 8283, 8283CC, 8527, 8527CC, 8575, 8575CC, 9975.) 8514 - Pins, Tensioner (Originally Shipped In Kit Number(s) 8283, 8283CC, 8527, 8527CC, 8575, 8575CC, 9975.) C-119 - Cylinder Indicator C-3292A - Gauge, Pressure C-3339A - Set, Dial Indicator (Originally Shipped In Kit Number(s) 9202.) C-3422-D - Compressor, Valve Spring C-3685-A - Bloc-Chek Kit C-385 - Compressor, Piston MD998772A - Compressor, Valve Spring (Originally Shipped In Kit Number(s) 8678, 8853, 8854.)

Scheme 182

Scheme 182: SPECIAL TOOLS
Scheme 182: SPECIAL TOOLS

Scheme 183

Scheme 183
Scheme 183

Scheme 184

Scheme 184
Scheme 184

Scheme 185

Scheme 185
Scheme 185

Scheme 186

Scheme 186
Scheme 186

Scheme 187

Scheme 187
Scheme 187

Scheme 188

Scheme 188
Scheme 188

Scheme 189

Scheme 189
Scheme 189

Scheme 190

Scheme 190
Scheme 190

Scheme 191

Scheme 191
Scheme 191

Scheme 192

Scheme 192
Scheme 192

Scheme 193

Scheme 193
Scheme 193

Scheme 194

Scheme 194
Scheme 194

Scheme 195

Scheme 195
Scheme 195

Scheme 196

Scheme 196
Scheme 196

Scheme 197

Scheme 197
Scheme 197

Scheme 198

Scheme 198
Scheme 198

Scheme 199

Scheme 199
Scheme 199

Scheme 200

Scheme 200
Scheme 200

Scheme 201

Scheme 201
Scheme 201

Scheme 202

Scheme 202
Scheme 202

Scheme 203

Scheme 203
Scheme 203

Scheme 204

Scheme 204
Scheme 204

Scheme 205

Scheme 205
Scheme 205

Scheme 206

Scheme 206: REMOVAL
Scheme 206: REMOVAL

Scheme 207

Scheme 207
Scheme 207
  1. Remove the fresh air makeup hose (1) at the air cleaner housing (3).
  2. Remove the air cleaner housing cover retaining bolts (2). CAUTION: Do not use compressed air to clean out the air cleaner housing without first covering the air inlet to the throttle body. Dirt or foreign objects could enter the intake manifold causing engine damage.
  3. Lift the air cleaner housing cover off the housing and position aside.
  4. Remove the air cleaner element (1).
  5. Remove any dirt or debris from the bottom of the air cleaner housing.

More articles — 3.6L Engine - Service Information