Home/Dodge/Caravan/Dodge Caravan III (1995-2000)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul - 3.8L: Specifica…
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul - 3.8L: Specifications Dodge Caravan III

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Air Intake Plenum-To-Intake Manifold Bolt21 (29)
Cylinder Head-To-Air Intake Plenum Brace Bolt40 (54)
Downstream Oxygen Sensor20 (27)
EGR Tube Bolt/Nut16 (22)
EGR Valve Bolt16 (22)
Fuel Pump Module Lock Nut43 (58)
Fuel Rail Bolt16 (22)
Fuel Tank Strap Bolt40 (54)
Generator Bracket-To-Air Intake Plenum Bolt40 (54)
Input Speed Sensor (4-Speed A/T)20 (27)
Oil Pan Bolt (4-Speed A/T)14 (19)
Output Speed Sensor (4-Speed A/T)20 (27)
Park/Neutral Switch (3-Speed A/T)24 (33)
Spark Plug20 (27)
Throttle Body Bolt/Nut19 (26)
Upstream Oxygen Sensor20 (27)
INCH Lbs. (N.m)
Camshaft Position Sensor Retaining Bolt124 (14.0)
Crankshaft Position Sensor Retaining Bolt105 (11.9)
Engine Coolant Temperature Sensor60 (6.8)
Fuel Line Retaining Bracket Bolt35 (4.0)
Idle Air Control Motor Retaining Screw17 (1.9)
Ignition Coil Retaining Bolt105 (11.9)
Knock Sensor84 (9.5)
Leak Detection Pump Bolt120 (13.6)
Throttle Position Sensor Retaining Screw17 (1.9)
Transmission Range Sensor Retaining Screw (4-Speed A/T)45 (5.1)
Valve Body-To-Transaxle Case Bolt (4-Speed A/T)105 (11.9)
Vehicle Speed Sensor Retaining Bolt (3-Speed A/T)60 (6.8)
Vent Plug60 (6.8)

TORQUE SPECIFICATIONS