Home/Dodge/Caravan/Dodge Caravan III (1995-2000)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul - 3.0L: Specifica…
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul - 3.0L: Specifications Dodge Caravan III

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Air Intake Plenum-To-Intake Manifold Bolt(1)
Downstream Oxygen Sensor20 (27)
EGR Tube Bolt/Nut16 (22)
EGR Valve Bolt16 (22)
Fuel Pump Module Lock Nut43 (58)
Fuel Rail Bolt(1)
Fuel Tank Strap Bolt40 (54)
Input Speed Sensor (4-Speed A/T)20 (27)
Oil Pan Bolt (4-Speed A/T)14 (19)
Output Speed Sensor (4-Speed A/T)20 (27)
Park/Neutral Switch (3-Speed A/T)24 (33)
Spark Plug20 (27)
Throttle Body Bolt/Nut19 (26)
Upstream Oxygen Sensor20 (27)
INCH Lbs. (N.m)
Crankshaft Position Sensor Retaining Bolt105 (11.9)
Distributor Hold-Down Nut124 (14.0)
Engine Coolant Temperature Sensor60 (6.8)
Idle Air Control Motor Retaining Screw17 (1.9)
Ignition Coil Retaining Bolt115 (13.0)
Knock Sensor84 (9.5)
Leak Detection Pump Bolt120 (13.6)
Throttle Position Sensor Retaining Screw17 (1.9)
Transmission Range Sensor Retaining Screw (4-Speed A/T)45 (5.1)
Valve Body-To-Transaxle Case Bolt (4-Speed A/T)105 (11.9)
(1) Tighten bolts to 115 INCH lbs. (13.0 N.m).
(1)Tighten bolts to 115 INCH lbs. (13.0 N.m).

TORQUE SPECIFICATIONS