Home/Dodge/Caravan/Dodge Caravan III (1995-2000)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul - 2.4L: Specifica…
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul - 2.4L: Specifications Dodge Caravan III

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Downstream Oxygen Sensor20 (27)
Fuel Pump Module Lock Nut43 (58)
Fuel Rail Bolt16 (22)
Fuel Tank Strap Bolt40 (54)
Input Speed Sensor (4-Speed A/T)20 (27)
Intake Air Temperature Sensor20 (27)
Intake Manifold-To-Cylinder Head Bolt17 (23)
Oil Pan Bolt (4-Speed A/T)14 (19)
Output Speed Sensor (4-Speed A/T)20 (27)
Park/Neutral Switch (3-Speed A/T)24 (33)
Spark Plug20 (27)
Throttle Body Bolt/Nut19 (26)
Upstream Oxygen Sensor20 (27)
INCH Lbs. (N.m)
Camshaft Position Sensor Retaining Bolt85 (9.6)
Crankshaft Position Sensor Retaining Bolt105 (11.9)
Engine Coolant Temperature Sensor60 (6.8)
Idle Air Control Motor Retaining Screw17 (1.9)
Ignition Coil Retaining Bolt105 (11.9)
Knock Sensor84 (9.5)
Leak Detection Pump Bolt120 (13.6)
Target Magnet Retaining Screw50 (5.6)
Throttle Position Sensor Retaining Screw17 (1.9)
Transmission Range Sensor Retaining Screw: 4-Speed A/T45 (5.1)
Valve Body-To-Transaxle Case Bolt: 4-Speed A/T105 (11.9)
Vehicle Speed Sensor Retaining Bolt: 3-Speed A/T60 (6.8)

TORQUE SPECIFICATIONS