Cylinder block
"a": reference zone (overhaul)
"b": overall flatness of the cylinder block sealing face 0,042 mm
| description | values |
|---|
| nominal dimension "A" | 235 ± 0,05 mm |
| machining permitted | without |
Cylinder bore
| description | values |
|---|
| nominal dimension | 85 (+ 0,02; -0) mm |
| description | values |
|---|
| cylinder chamfer angle "D" | 25° +/- 5° |
| cylinder chamfer thickness "E" | 0,4 ± 0,2 mm |
| description | values |
|---|
| max. surface variation (as "c") | 0,03 mm |
| minimum surface "C" | 5,5 mm |
NoteThe flatness is defined on the surface "C" of each cylinder
