Vehicle concerned
CITROËN C2 full CAN
From diagnostic CD N° 45
CITROËN C4, CITROËN C4 SEDAN
From remote update CD 6.33
CITROEN DISPATCH 3
From diagnostic CD N° 45
CITROEN C5 restyled
From diagnostic CD N° 45
CITROËN C3 PLURIEL
From diagnostic CD N° 45
Summary
Safety recommendations
Preliminary operations
Configuration
- Configuring by Internet
- Configuration tables
- Configuration
- Orientation of the infra-red sensors
- Configuration of the personalisation menu
Safety recommendations
NoteThe configuration operation is a delicate operation which has direct consequences for the operation of the vehicle
Incorrect configuration can have adverse effects on
- Safety (deactivation of the vehicle's protection systems)
- The overall operation of the vehicle (complete loss or downgading of vehicle functions)
- Vehicle diagnostics (recording of fault codes that can cause the tool's diagnostic procedures to fail, leading to unjustified removal of components)
Before attempting to start the engine
- Check that the parking brake is activated
- If an automatic gearbox, check that the gear lever is in position "P" (Park)
- If a manual gearbox, check that the gear lever is in neutral
Preliminary operations
Before any operations
- Establish communication with the ECU, using the diagnostic tool
- Print out all the diagnostic tool screens that indicate the configuration parameter values, or note down these values by hand
Configuration
If configuring the ECU
- Establish communication with the ECU
- Perform the configuration by internet
- Check the download
Down-loading of the control unit
- Establish communication with the ECU
- Carry out the download
- Perform the configuration by internet
- Check the download
- Carry out the programming operations (if necessary)
Replacing the ECU
- Fit the new ECU
- Establish communication with the ECU
- Perform the configuration by internet
- Check the download
- Carry out the programming operations (if necessary)
Configuring by Internet
Perform the configuration by internet
WarningIf the configuration by internet does not work (presence of a message on the diagnostic tool indicating the error code associated with the phrase "repeating the operation will serve no purpose"), perform a manual configuration instead of the configuration by internet (refer to the configuration table)
Configuration tables
Customer configuration
| configuration parameters | values to be configured | comments | |
|---|---|---|---|
| driver language | French | Used to configure the language selected for displaying data and information on the multifunction display | |
| English | |||
| German | |||
| Spanish | |||
| Italian | |||
| Portuguese | |||
| dutch | |||
| Brazilian | |||
| Turkish | |||
| date format | DD MM YY | French: DD MM YY (Day Month Year) | |
| MM DD YY | English: MM DD YY (Month Day Year) | ||
| temperature unit | °Celsius | temperature display unit (degrees Celsius or degrees Fahrenheit) | |
| ° Fahrenheit | |||
| locking of the menus of the multifunction screen | no OK | access to the menus of the multifunction screen is authorised when the vehicle is moving | |
| yes | access to the menus of the multifunction screen is locked when the vehicle is moving |
(1) to be configured according to the equipment
(2) configuration of another value prohibited
(3) parameter configured automatically during the "choice of the service schedule" procedure
(4) parameters which must always be checked following a configuration over the internet
| configuration parameters | values to be configured | comments | |
|---|---|---|---|
| driver language | French | (2) according to country | |
| English | |||
| German | |||
| Spanish | |||
| Italian | |||
| Portuguese | |||
| dutch | |||
| Brazilian | |||
| Turkish | |||
| Russian | |||
| date format | DD MM YY | (2) according to country | |
| MM DD YY | |||
| temperature unit | °Celsius | (2) according to country | |
| ° Fahrenheit | |||
| type of display | Normal mode | (1) as chosen by the customer | |
| inverse mode |
(1) to be configured according to the equipment
(2) configuration of another value prohibited
(3) parameter configured automatically during the "choice of the service schedule" procedure
(4) parameters which must always be checked following a configuration over the internet
Vehicle configuration
| configuration parameters | values to be configured | comments | |
|---|---|---|---|
| CD changer option | absent | informs the multifunction screen that a CD changer is present in the vehicle the multifunction screen needs this information to authorise the display of the CD changer data | |
| present | |||
| display of the external temperature | absent | informs the multifunction screen that an exterior temperature sensor is present in the vehicle the multifunction screen needs this information to authorise the display of the exterior temperature data | |
| present | |||
| audio system option | absent | informs the multifunction screen that an audio system is present in the vehicle the multifunction screen needs this information to authorise the display of the audio system data | |
| present | |||
| trip computer option | absent | checks if the "trip computer" option is active the "trip computer" option makes it possible to display the consumption, average speed, etc. on the multifunction screen | |
| present | |||
| Permanent displaying of the vehicle outline | absent | (2) | |
| control of the multifunction screen by the steering wheel radio control | no OK | indicates if the radio control under the steering wheel controls the multifunction screen | |
| yes | |||
| type of connection to the remote control | wired (no radio) | indicates the type of multifunction control | |
| via CAN (with RD4 audio system) | |||
| multifunction screen buttons (without RD4 audio system) |
(1) to be configured according to the equipment
(2) configuration of another value prohibited
(3) parameter configured automatically during the "choice of the service schedule" procedure
(4) parameters which must always be checked following a configuration over the internet
| configuration parameters | values to be configured | comments | |
|---|---|---|---|
| air conditioning option | absent | (2) | |
| CD changer option | absent | (1) vehicle without CD changer | |
| present | (1) with the CD player | ||
| display of the external temperature | present | (2) | |
| audio system option | absent | (1) without audio system | |
| present | (1) with audio system | ||
| trip computer option | present | (2) | |
| under-inflation detection option | Function not managed by the multifunction display | (2) | |
| type of instrument panel | instrument panel without trip computer | (1) | |
| instrument panel with trip computer | |||
| data communication ECU | absent | (2) | |
| Permanent displaying of the vehicle outline | absent | (2) | |
| control of the multifunction screen by the steering wheel radio control | no OK | (2) | |
| type of connection to the remote control | wired (no radio) | indicates the type of multifunction control | |
| via CAN (with RD4 audio system) | |||
| multifunction screen buttons (without RD4 audio system) |
(1) to be configured according to the equipment
(2) configuration of another value prohibited
(3) parameter configured automatically during the "choice of the service schedule" procedure
(4) parameters which must always be checked following a configuration over the internet
| configuration parameters | values to be configured | comments | |
|---|---|---|---|
| CD changer option | absent | informs the multifunction screen that a CD changer is present in the vehicle the multifunction screen needs this information to authorise the display of the CD changer data | |
| present | |||
| display of the external temperature | absent | informs the multifunction screen that an exterior temperature sensor is present in the vehicle the multifunction screen needs this information to authorise the display of the exterior temperature data | |
| present | |||
| audio system option | absent | informs the multifunction screen that an audio system is present in the vehicle the multifunction screen needs this information to authorise the display of the audio system data | |
| present | |||
| trip computer option | absent | checks if the "trip computer" option is active the "trip computer" option makes it possible to display the consumption, average speed, etc. on the multifunction screen | |
| present | |||
| display of vehicle range in the instrument panel | instrument panel without range | (2) | |
| Permanent displaying of the vehicle outline | absent | (2) | |
| control of the multifunction screen by the steering wheel radio control | no OK | indicates if the radio control under the steering wheel controls the multifunction screen | |
| yes | |||
| type of connection to the remote control | wired (no radio) | indicates the type of multifunction control | |
| via CAN (with RD4 audio system) | |||
| multifunction screen buttons (without RD4 audio system) |
(1) to be configured according to the equipment
(2) configuration of another value prohibited
(3) parameter configured automatically during the "choice of the service schedule" procedure
(4) parameters which must always be checked following a configuration over the internet
| configuration parameters | values to be configured | comments | |
|---|---|---|---|
| air conditioning option | present | (2) | |
| CD changer option | absent | informs the multifunction screen that a CD changer is present in the vehicle the multifunction screen needs this information to authorise the display of the CD changer data | |
| present | |||
| display of the external temperature | present | (2) | |
| audio system option | absent | informs the multifunction screen that an audio system is present in the vehicle the multifunction screen needs this information to authorise the display of the audio system data | |
| present | |||
| trip computer option | present | (2) | |
| display of vehicle range in the instrument panel | instrument panel without range | (2) | |
| control of the multifunction screen by the steering wheel radio control | no OK | indicates if the radio control under the steering wheel controls the multifunction screen | |
| yes | |||
| type of connection to the remote control | via CAN (with RD4 audio system) | indicates the type of multifunction control | |
| multifunction screen buttons (without RD4 audio system) |
(1) to be configured according to the equipment
(2) configuration of another value prohibited
(3) parameter configured automatically during the "choice of the service schedule" procedure
(4) parameters which must always be checked following a configuration over the internet
| configuration parameters | values to be configured | comments | |
|---|---|---|---|
| personalisation menu | active | (2) | |
| display of the "total obstacle proximity detection" option | deactivated | (2) | |
| display of the "triggering of the rear wiping when reversing" option | deactivated | masks the display of this option if the customisation menu is active | |
| active | |||
| display of the option "automatic lighting of headlamps" | deactivated | masks the display of this option if the customisation menu is active automatic illumination of the lamps turns the lamps on as soon as the external light level is too low | |
| active | |||
| display of the option "guide-me-home lighting" | deactivated | masks the display of this option if the customisation menu is active the guide-me-home lighting switches on the lights for a certain time after the engine is switched off | |
| active | |||
| display of the "permanent locking of the boot" option | deactivated | (2) | |
| display of the "locking of driver's door only" option | deactivated | (2) |
(1) to be configured according to the equipment
(2) configuration of another value prohibited
(3) parameter configured automatically during the "choice of the service schedule" procedure
(4) parameters which must always be checked following a configuration over the internet
| configuration parameters | values to be configured | comments | |
|---|---|---|---|
| personalisation menu | active | (2) | |
| display of the "total obstacle proximity detection" option | deactivated | (2) | |
| display of the "triggering of the rear wiping when reversing" option | deactivated | for C4 SEDAN | |
| active | for C4 | ||
| display of the option "automatic lighting of headlamps" | deactivated | masks the display of this option if the customisation menu is active automatic illumination of the lamps turns the lamps on as soon as the external light level is too low | |
| active | |||
| display of the option "guide-me-home lighting" | deactivated | masks the display of this option if the customisation menu is active the guide-me-home lighting switches on the lights for a certain time after the engine is switched off | |
| active | |||
| display of the "directional headlamp" option | deactivated | masks the display of this option if the customisation menu is active | |
| active | |||
| display of the "permanent locking of the boot" option | deactivated | (2) | |
| display of the "locking of driver's door only" option | deactivated | (2) | |
| display of the "deactivation automatic electric secondary brake" | deactivated | (2) | |
| display of the "daylight lights" option | deactivated | (2) |
(1) to be configured according to the equipment
(2) configuration of another value prohibited
(3) parameter configured automatically during the "choice of the service schedule" procedure
(4) parameters which must always be checked following a configuration over the internet
| configuration parameters | values to be configured | comments | |
|---|---|---|---|
| personalisation menu | active | (2) | |
| display of the "total obstacle proximity detection" option | deactivated | (2) | |
| display of the "triggering of the rear wiping when reversing" option | deactivated | masks the display of this option if the customisation menu is active | |
| active | |||
| display of the option "automatic lighting of headlamps" | deactivated | masks the display of this option if the customisation menu is active automatic illumination of the lamps turns the lamps on as soon as the external light level is too low | |
| active | |||
| display of the option "guide-me-home lighting" | active | (2) | |
| display of the "directional headlamp" option | deactivated | masks the display of this option if the customisation menu is active | |
| active | |||
| display of the "permanent locking of the boot" option | deactivated | (2) | |
| display of the "locking of driver's door only" option | deactivated | (2) |
(1) to be configured according to the equipment
(2) configuration of another value prohibited
(3) parameter configured automatically during the "choice of the service schedule" procedure
(4) parameters which must always be checked following a configuration over the internet