Recommended tools
| reference | designation | reference |
|---|---|---|
| [1] | RH engine support | 5730-T.A |
| reference | designation | reference |
|---|---|---|
| [2] | L.H. engine support | 5730-T.B |
| reference | designation | reference | reference |
|---|---|---|---|
| [3] | engine support cradle | 2509-T | DESVIL (reference 125) |
Preparing the engine
Remove
- The oil trap (1)
- The dipstick (2)
- The tubes (3)
Remove
- The EGR pipe (4)
- The lubrication tube (6)
- The turbocharger (7) and exhaust manifold assembly
- The air inlet duct (8)
- The coolant pipe (5)
Fitting the engine to the stand
Fit
- The tool [1] (right hand side)
- The screws (9) and (10)
Fit
- The tool [2] (left side)
- The screws (11) and (12)
Position and fix the tools [1] and [2] to the stand [3] using the nuts and bolts (13)