Home ReviewsRefund
Home/Chrysler/LHS/Chrysler LHS II (1998-2001)/Repair manual/Mechanical/Removal (Lower): Overview
Contents Wiring diagrams Section: Mechanical All sections

Removal (Lower): Overview Chrysler LHS II

Mechanical ~147 words
  1. Release fuel pressure. See «FUEL PRESSURE RELEASE»(ref-1437-S14186028602000031300000). Drain cooling system. Cover drive belts and/or pulleys to prevent contact with coolant. If coolant contacts belts and/or pulleys, flush both with clean water. Open radiator drain located at lower right side of radiator.
  2. DO NOT use pliers to open radiator drain. Remove coolant pressure bottle cap and open air bleed valve located on water outlet connector at front of engine. (Схема №6) Remove cylinder block drain plugs located below each exhaust manifold.
  3. Remove upper intake manifold. Disconnect fuel injector and coolant temperature sensor connectors. Disconnect heater hose quick connect "T" from heater tube located at rear of manifold. Disconnect Fuel supply hose from fuel rail. See «FUEL LINE QUICK-CONNECT FITTING»(ref-1437-S17786892382000031300000).
  4. Remove throttle body bracket-to-fuel rail bracket screw. Remove fuel rail bolts. Remove fuel rail and injectors as an assembly. Remove lower intake manifold bolts and manifold.

More articles — Removal (Lower)