Home ReviewsRefund
Home/Chrysler/Crossfire/Chrysler Crossfire I (2003-2007)/Repair manual/Mechanical/Installation - Right: Overview
Contents Wiring diagrams Section: Mechanical All sections

Installation - Right: Overview Chrysler Crossfire I

Mechanical 1 illustration ~120 words
  1. Position the engine mount brackets (2) on the engine block.
  2. Install the new bolts (1). Tighten to 20 N.m (15 ft. lbs.) plus 90° clockwise.
  3. Install the engine mounts. «(Refer to ENGINE/ENGINE MOUNTING/FRONT MOUNT - INSTALLATION)»(ref-250615-S05139826002007031500000) .

Scheme 82

Scheme 82: REMOVAL
Scheme 82: REMOVAL
1 - ENGINE MOUNT UPPER BOLT
2 - HEAT SHIELD
3 - ENGINE MOUNT
4 - ENGINE MOUNT LOWER BOLT
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner housing. «(Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL)»(ref-250615-S26276682392007031500000) .
  3. Attach the engine support frame.
  4. Remove the engine mount upper bolt (1) and the heat shield (2). CAUTION: Do not stretch lines and hoses while lifting engine.
  5. Raise the engine slightly.
  6. Raise and support the vehicle.
  7. Remove the lower splash shield screws (1) and the splash shield.
  8. Remove the engine mount lower bolt.
  9. Remove the engine mount.

More articles — Installation - Right