Home/Chevrolet/Uplander/Chevrolet Uplander I (2004-2008)/Repair manual/Communication Devices/Computer/integrating Systems: Adjustments

Contents

Wiring diagrams Section: Communication Devices

All sections

Computer/integrating Systems: Adjustments Chevrolet Uplander I

Communication Devices

BPP Sensor Calibration

IMPORTANT

If the BCM, electronic brake control module (EBCM) or the brake apply sensor (BAS) is replaced a brake pedal position (BPP) sensor calibration must be preformed.

Perform the BPP Sensor Calibration using a scan tool if the BCM, EBCM or the brake apply sensing system (BASS) sensor has been replaced.

Using a scan tool preform the following

Navigate to the Module Setup menu in Computer Integrating Systems on the scan tool, select Body Control Module.
Select BPP Sensor Calibration.
Follow the on-screen directions.