Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Caliper Bleeder Valve | 17 N.m | 13 lb ft |
| Brake Caliper Bracket Bolt | 100 N.m | 74 lb ft |
| Brake Caliper Guide Pin Bolt | 28 N.m | 21 lb ft |
| Brake Hose Fitting Bolt | 40 N.m | 30 lb ft |
| Brake Pipe Fitting | 18 N.m | 13 lb ft |
| Brake Rotor Bolt | 9 N.m | 80 lb in |
| Brake Shield Bolt | 9 N.m | 80 lb in |
Fastener Tightening Specifications
Disc Brake Component Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Rotor | ||
| Rotor Diameter | 276.0 mm | 10.866 in |
| Rotor Discard Thickness* | 23.0 mm | 0.905 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.06 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.02 mm | 0.0008 in |
| Rotor Minimum Allowable Thickness After Refinish | 24.0 mm | 0.945 in |
| Rotor Thickness New | 26.0 mm | 1.024 in |
| Rear Rotor | ||
| Rotor Diameter | 268.0 mm | 10.551 in |
| Rotor Discard Thickness* | 10.0 mm | 0.393 in |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.05 mm | 0.002 in |
| Rotor Maximum Allowable Scoring | 1.50 mm | 0.059 in |
| Rotor Maximum Allowable Thickness Variation | 0.02 mm | 0.0008 in |
| Rotor Minimum Allowable Thickness After Refinish | 10.2 mm | 0.402 in |
| Rotor Thickness New | 12.0 mm | 0.472 in |
| * All brake rotors have a minimum thickness dimension cast into them. Replace any rotor that is worn or machined below this specification. | ||
Disc Brake Component Specifications