Contents Wiring diagrams Section: Mechanical All sections

Removal & Installation Buick Roadmaster VIII

  1. Remove rocker arms and push rods as necessary. See ROCKER ARMS & PUSH RODS under REMOVAL & INSTALLATION. Remove rocker arm stud(s) using Stud Remover (J-5802-01). Ream stud bore to replacement size of oversize stud. Oversize studs are available in .003" (.08 mm) and .013" (.33 mm).
  2. Coat press-fit area of stud with hypoid axle lubricant. Install rocker arm stud using Stud Installer (J-6880) until installer bottoms out on cylinder head. To complete installation, reverse removal procedure.