35 11 Pedal Assembly Console
| Application | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Bearing pedestal to brake assembly and body | E38, E39, E52 | 31 Nm | ||
| E36, E46 | 25 Nm | |||
| E53, E65, E66, E67, E60, E61, E63, E64, E83 | Retighten 1x on brake booster after 30 min. | 26 Nm | ||
| E85 | M8 | Retighten 1x on brake booster after 30 min | 22 Nm | |
| 2AZ Bracket to bearing block | E85 | M6 | 9 Nm |
35 11 PEDAL ASSEMBLY CONSOLE TIGHTENING SPECIFICATION
35 21 Brake Pedal and Linkage
| Application | Type | Measure |
|---|---|---|
| 1AZ Piston rod lock nut | All | 27 Nm |
| 2AZ Nut on shaft | All | 27 Nm |
| 3AZ Pull rod Nut for pivot | All | 27 Nm |
| 4AZ Left and right reversing lever Nut on shaft bolt | All | 27 Nm |
| 5AZ Support to console Brake booster | All | 22 Nm |
| 6AZ Support to console Reversing lever | All | 27 Nm |
35 21 BRAKE PEDAL AND LINKAGE TIGHTENING SPECIFICATION
35 31 Clutch Pedal and Linkage
| Application | Type | Measure |
|---|---|---|
| 1AZ Piston rod lock nut | All | 6 Nm |
| 2AZ Spring lock nut | All | 6 Nm |
| 3AZ Piston rod shaft bolt | All | 22 Nm |
| 5AZ Bearing pin, spring pedal | All | 22 Nm |
| 6AZ Clutch pedal Nut on eccentric bolt | All | 22 Nm |
35 31 CLUTCH PEDAL AND LINKAGE TIGHTENING SPECIFICATION
34 41 Parking Brake
| Application | Type | Thread | Measure |
|---|---|---|---|
| 1AZ Handbrake lever to body | E52, E53, E60, E61, E63, E64 | 21 Nm | |
| 2AZ Housing cover to parking brake | E65, E66, E67 | 2 Nm | |
| 3AZ Actuating unit and control unit of parking brake | E65, E66, E67 | 4 Nm | |
| 4AZ Mounting pan to tunnel | E85 | M6 | 8 Nm |
| 5AZ Spring clip to wheel carrier | E60, E61, E63, E64 | M6 | 8 Nm |
| 6AZ Support Duo-Servo to wheel carrier, rear | E60, E61, E63, E64 | M10 | 60 Nm |
34 41 PARKING BRAKE TIGHTENING SPECIFICATION
| Application | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Bearing pedestal to brake assembly and body | E38, E39, E52 | 31 Nm | ||
| E36, E46 | 25 Nm | |||
| E53, E65, E66, E67, E60, E61, E63, E64, E83 | Retighten 1x on brake booster after 30 min. | 26 Nm | ||
| E85 | M8 | Retighten 1x on brake booster after 30 min | 22 Nm | |
| 2AZ Bracket to bearing block | E85 | M6 | 9 Nm |
35 11 PEDAL ASSEMBLY CONSOLE TIGHTENING SPECIFICATION
35 40 Pedals
| Application | Type | Thread | Measure |
|---|---|---|---|
| 1AZ Accelerator pedal module to body | All | 19 Nm | |
| E65, E66, E83, E85 | M6 | 9 Nm | |
| E60, E61, E63, E64, E67 M6 | 8 Nm |
35 40 PEDALS TIGHTENING SPECIFICATION
35 41 Accelerator Pedal and Linkage
| Application | Type | Measure |
|---|---|---|
| 1AZ Accelerator travel stop | All | 10 Nm |
35 41 ACCELERATOR PEDAL AND LINKAGE TIGHTENING SPECIFICATION