32 00 Steering
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Steering gear to front axle carrier | E81, E82, E87, E88, E90, E91, E92, E93 | M10 | Replace screws & nuts | |
| Jointing torque | 56 Nm | ||||
| Torque angle | 90° | ||||
| 2AZ | Heat shield to steering gear | E81, E82, E87, E88, E90, E91, E92, E93 | M6 | 7.6 Nm | |
| 3AZ | Water drain valve to electric steering gear (EPS) | E81, E82, E87, E88, E90, E91, E92, E93 | Replace O-ring | 20 Nm | |
| 4AZ | EH converter to power steering gear | E90/S65, E92/S65, E93/S65 | 3 Nm | ||
STEERING-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Steering gear to front axle carrier | E81, E82, E87, E88, E90, E91, E92, E93 | M10 | Replace screws & nuts | |
| Jointing torque | 56 Nm | ||||
| Torque angle | 90° | ||||
| 2AZ | Heat shield to steering gear | E81, E82, E87, E88, E90, E91, E92, E93 | M6 | 7.6 Nm | |
| 3AZ | Water drain valve to electric steering gear (EPS) | E81, E82, E87, E88, E90, E91, E92, E93 | Replace O-ring | 20 Nm | |
| 4AZ | EH converter to power steering gear | E90/S65, E92/S65, E93/S65 | 3 Nm | ||
STEERING-TIGHTENING TORQUE SPECIFICATIONS
32 21 Steering Arms
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Tie rod to rack | E81/ZF, E82/ZF, E87/ZF, E88/ZF, E90/ZF, E91/ZF, E92/ZF, E93/ZF | 110+10 Nm | ||
| E81/TRW, E82/TRW, E87/TRW, E88/TRW, E90/TRW, E91/TRW, E92/TRW, E93/TRW | 100+10 Nm | ||||
| 2AZ | Tie rod to tie rod end | E81, E82, E87, E88, E90, E91, E92, E93 | M10 | Replace screw | 40 Nm |
| 3AZ | Tie rod end to swivel bearing | E81, E82, E87, E88, E90/REAR END, E91/REAR END, E92/REAR END, E93 | M14 | Replace nut | 165 Nm |
| E90/Four Wheel Drive, E91/Four Wheel Drive, E92/Four Wheel Drive | M14 | Replace nut | 80 Nm | ||
| 4AZ | Heat shield for gaiter to front axle carrier | E90/Four Wheel Drive, E91/Four Wheel Drive, E92/Four Wheel Drive | M6 | 8 Nm | |
STEERING ARMS-TIGHTENING TORQUE SPECIFICATIONS
32 31 Steering Column
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Lower section of steering spindle to steering gear/steering column | E81, E82, E87, E88, E90/REAR END, E91/REAR END, E92/REAR END, E93 | M8 | Recut thread Replace clamping screw No subsequent buckling permitted! | 21 Nm |
| 2AZ | Steering column to support tube | E81, E82, E87, E88, E90, E91, E92, E93 | M8 | 21 Nm | |
| 3AZ | Double joint to power steering gear | E90/Four Wheel Drive, E91/Four Wheel Drive, E92/Four Wheel Drive | M8 | Recut thread Replace clamping screw No subsequent buckling permitted! | 21 Nm |
| 4AZ | Steering spindle lower section to double joint/steering column | E90/Four Wheel Drive, E91/Four Wheel Drive, E92/Four Wheel Drive | M8 | Recut thread Replace clamping screw No subsequent buckling permitted! | 21 Nm |
| 5AZ | Universal joint to steering spindle lower section/steering column | E90/S65, E92/S65, E93/S65 | M8 | Recut thread Replace clamping screw No subsequent buckling permitted! | 21 Nm |
STEERING COLUMN-TIGHTENING TORQUE SPECIFICATIONS
32 33 Steering Wheel
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Steering wheel to steering column | E81, E82, E87, E88, E90, E91, E92, E93 | M14 | 62.5 Nm | |
STEERING WHEEL-TIGHTENING TORQUE SPECIFICATIONS
32 41 Pump and Oil Supply
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Oil reservoir to holder | E81, E82, E87, E88, E90, E91, E92, E93 | M6 | 4 Nm | |
| 2AZ | Multipurpose holder to body/holder for oil reservoir | E81, E82, E87, E88, E90, E91, E92, E93 | M6 | 5 Nm | |
| 3AZ | Belt pulley to power steering pump | E81, E82, E87, E88, E90, E91, E92, E93 | M8 | Replace screws or stick on again. | 19 Nm |
| N54 | M8 | Replace screws or stick on again. | 21 Nm | ||
| 4AZ | Power steering pump to water pump | N43/N45/N46/N45T/N46T | M8 | 32 Nm | |
| 5AZ | Power steering pump to holder | M47T2/M57T2/N57/N43 | M8 | 19 Nm | |
| 6AZ | Bracket of power steering pump to crankcase/oil sump | M47T2/M57T2/N57/N47/N47S | M8 | 19 Nm | |
| M57T2/335D | M6 | 8 Nm | |||
| N51/N52/N52K/N53 | M8 | Replace aluminium screws. Use only Helicoil made of aluminium for thread repairs. Jointing torque and angle of rotation must be observed without fail. | |||
| Jointing torque | 20 Nm | ||||
| Torque angle | 90° | ||||
| N54 | M10 | Follow repair instruction . | 38 Nm | ||
| 7AZ | Power steering pump to crankcase | N43/N45/N46/N45T/N46T | M8 | 19 Nm | |
| 8AZ | Pressure line to power steering pump | E81, E82, E87, E88, E90, E91, E92, E93 | M16 | 35 Nm | |
| 9AZ | Pressure line to power steering gear | E81, E82, E87, E88, E90/Except S65, E91, E92/Except S65, E93/Except S65 | M14 non-return valve | 30 Nm | |
| S65 | M14 non-return valve | 33 Nm | |||
| 10AZ | Return line to power steering gear | E81, E82, E87, E88, E90, E91, E92, E93 | M16 | 35 Nm | |
| 11AZ | Mounting, hydraulic line | E81, E82, E87, E88, E90, E91, E92, E93 | M6 | 8 Nm | |
| 12AZ | Vane pump to A/C compressor mounting bracket | S65 | M8 | 19 Nm | |
PUMP AND OIL SUPPLY-TIGHTENING TORQUE SPECIFICATIONS
32 43 Electronic Power Steering
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Retaining plate, active front steering control unit to body | E81, E82, E87, E88, E90, E91, E92, E93 | M6 | 7.5 Nm | |
ELECTRONIC POWER STEERING-TIGHTENING TORQUE SPECIFICATIONS