Home/Audi/TT/Audi TT 8N рестайлинг (2003-2006)/Repair manual/Electrical Equipment/Wind Deflector Switch, -E278-, removing and installing
Contents Section: Electrical Equipment All sections

Wind Deflector Switch, -E278-, removing and installing Audi TT 8N рестайлинг

Electrical Equipment 1 illustration

Wind Deflector Switch, -E278-, removing and installing

CAUTIONBefore beginning repairs on the electrical system: Switch off all electrical consumers. Switch ignition off and remove ignition key.

Removing

  1. Remove switch mount in rear center console. Refer to «Switch mount in rear center console, removing and installing»(/audi/tt/8n-2003-2006/remont/cruise-control-systems/#electrical-equipment__switch-mount-in-rear-center-console) .

Scheme 190

Scheme 190
  1. Use small knife or feeler gauge to release retainer tabs -arrows-.
  2. Pull switch -2- downwards out of switch mount -1-.

Installing

Install in reverse order of removal of removal, noting the following

  1. Press switch into switch mount until fasteners engage.