FASTENER TIGHTENING SPECIFICATIONS
| Component | Bolt Size | Nm |
|---|---|---|
| After Run Coolant Pump Bracket to Mounting Bracket Bolt | 4 | |
| After Run Coolant Pump Mounting Bracket to Cylinder Block Bolt | 5 | |
| Connecting Piece | 9 | |
| Coolant Fan, Nut | 10 | |
| Drive Gear for Toothed Belt (1) | 10 + 90° | |
| Fan Shroud, Nut/Bolt | 5 | |
| Front Coolant Pipes | 5 | |
| Radiator | 5 | |
| Small Coolant Pipe | 9 | |
| Toothed Belt Guard | 9 | |
| (1) Always replace | ||
| (1) | Always replace |
Coolant Pump Tightening Sequence
Tighten the bolt in the following sequence: -1 to 8-.
- 9 Nm