Home ReviewsRefund Car not listed?
Home/Audi/S8/Audi S8 D3 рестайлинг (2007-2011)/Repair manual/Body Interior/Window Regulator Switch Strip, Removing and Installing
Contents Section: Body Interior All sections

Window Regulator Switch Strip, Removing and Installing Audi S8 D3 рестайлинг

Body Interior 1 illustration

Window Regulator Switch Strip, Removing and Installing

Removing

  1. Remove door trim --> «Front Door Trim, Removing and Installing»(/audi/s8/d3-2007-2011/remont/gauges-instrument-panels/#body-interior__front-door-trim-removing-and-installing) .
  2. Remove insulation --> «Insulation, Removing and Installing»(/audi/s8/d3-2007-2011/remont/gauges-instrument-panels/#body-interior) and --> «Front Door Trim, Removing and Installing»(/audi/s8/d3-2007-2011/remont/gauges-instrument-panels/#body-interior__front-door-trim-removing-and-installing) .
  3. Remove armrest --> «Armrest, Removing and Installing»(/audi/s8/d3-2007-2011/remont/gauges-instrument-panels/#body-interior) .

Scheme 224

Scheme 224
Scheme 224
  1. Using a screwdriver, pry out window regulator switch strip - 1 - at positions - 2 - (4x).
  2. Remove connector - 3 -.

Installing

  1. Install window regulator switch strip - 1 - in reverse order of removal.