Home ReviewsRefund
Home/Audi/S8/Audi S8 D3 рестайлинг (2007-2011)/Repair manual/Body Interior/Cooler Compressor Control Module, Removing and Installing
Contents Section: Body Interior All sections

Cooler Compressor Control Module, Removing and Installing Audi S8 D3 рестайлинг

Body Interior 2 illustrations

Cooler Compressor Control Module, Removing and Installing

Removing

  1. Remove cooler --> «Cooler, Removing and Installing»(/audi/s8/d3-2007-2011/remont/gauges-instrument-panels/#body-interior__cooler-removing-and-installing) .

Scheme 147

Scheme 147
Scheme 147
  1. Using a rotating motion, pull off control module from bracket - arrow 1 -.
  2. Remove control module - arrow 2 - upward.

Scheme 148

Scheme 148
Scheme 148
  1. Press off electrical harness connector - 2 - in direction of arrow from compressor.
  2. Disconnect electrical harness connectors - 1 - on control module.

Installing

Installation is reverse of removal.