WASHER FLUID LINES
The following descriptions can be found in electrical system general information. Refer to General Information
- Washer fluid line hose connections, disconnecting and connecting
- Corrugated hose washer fluid line, repairing
WINDSHIELD WASHER FLUID RESERVOIR FILLER NECK
Observe notes on contact corrosion. Refer to CONTACT CORROSION .
WINDSHIELD WASHER FLUID RESERVOIR
Special tools and workshop equipment required
- Drip tray
Observe notes on contact corrosion. Refer to CONTACT CORROSION .
WINDSHIELD WASHER FLUID LEVEL SENSOR -G33
Special tools and workshop equipment required
- Drip tray
Observe notes on contact corrosion. Refer to CONTACT CORROSION .
Scheme 13
Switch off ignition and remove ignition key.
Remove left front wheel.
Remove left front wheel housing liner. Refer to Removal and Installation .
Disconnect the electrical connector -1-.
Place a drip tray under the windshield washer fluid reservoir.
Remove the windshield washer fluid level sensor -G33- -item 3- from the washer fluid reservoir -4-.
HEADLAMP WASHER FLUID RESERVOIR
Note. The shared windshield and headlamp washer system washer fluid reservoir is located in the left rear wheel housing. Removing and installing, refer to WINDSHIELD WASHER FLUID RESERVOIR .